• CC Arc Force Control Knob with built-in "Hot Start".
• "Idle Shut Down mode" automatically shuts machine off when not in use to minimize power consumption.
• Fan-As-Needed™ – solid state thermally controlled cooling fan operates only when required. Minimizes power consumption, operating noise and dust intake.
• Full range calibrated output voltage and control for easy operation.
• Separate output studs let you choose low or high inductance. Select high inductance for most stick and wire processes. Select low inductance for Innershield® NR-211-MP, NR-212, and NR-203 type wires.
• Optional digital ammeter/voltmeter kit. Easy front panel installation.
• Panel switches are behind front latched panel, for remote or machine panel output control, and output "on" or remote "on" selection, and CC, CV Subarc or CV MIG mode selection.
• Low profile case allows stacking machines up to three high to conserve floor space (stacking not recommended when using undercarriage).
• Electronic and thermal protection from current overload and excessive temperatures.
• Function lights built into printed circuit boards speed diagnosis.
• Recessed front panel protects operating controls from damage.
• Both 14 pin MS-style cable connection and terminal strip access for remote control and wire feeder connections and output studs for weld cables.
• Power on/off switch with pilot light and thermal trip indicator light.
• Circuit breaker protected 115V and 42V AC wire feeder auxiliary power.
• 115V duplex receptacle provides 20 amps of auxiliary power. (15 amps for Canadian CSA model).
• Line voltage compensation for maintaining weld consistency, even with line voltage changes of ±10%.
• CSA Approved and UL listed.
• Three year warranty on parts and labor.
• Manufactured under a quality system certified to ISO 9001 requirements.