The lightweight and rugged design of the Mobiflex™ 200-M along with the standard front caster and rear wheels allows for easy portability. It is ideal for facilities that require welding fume extraction in multiple locations, including maintenance departments, general fabrication and job shops, and industrial welding environments.

The Mobiflex™ 200-M can be configured with Lincoln’s® LFA 3.1 or LFA 4.1 fume extraction arms or with the 160 mm (6.3 in.) diameter, 5 m (16 ft.) long flexible hose and hood set. Lincoln Electric’s® fume extraction arms are designed to provide operators with optimal motion and reach for their specific welding position(s) and work area. The arm lengths range from 3 meter (10 ft.) to 4 meters (13 ft.). For hard to reach areas such as confined spaces, the flexible hose set can be easily carried to locations where an extraction arm is not feasible.

The Mobiflex™ 200-M has an on-board internal extraction fan and is designed specifically for weld applications. It extracts weld fume through the arm, into the internal spark arrestor and finally through the unique LongLife® filter cartridge capturing the welding fume particulate. The particulate is collected on the inside of the cartridge, minimizing exposure to particulate during filter maintenance and disposal.

The Mobiflex™ 200-M system is recommended for consumable use of approximately 1500 lbs. (680 kg) of MIG wire or 1100 lbs. (500 kg) of stick and flux-cored wire before replacing.

Filter performance will be affected by process and application variables including: base metal(s), consumables(s), and coatings (oil) if applicable.