The Statiflex™ 200-M is ideal for a variety of facilities in which floor space is a premium including: maintenance departments, general fabrication and welding job shops, weld schools, and industrial welding environments.

The Statiflex™ 200-M can be configured as a single or dual arm system. Lincoln Electric’s® fume extraction arms are designed to provide welders optimal motion and reach for their specific welding position(s) and work area. The arm lengths range from 1 m (3 ft.) to 8 m (27 ft.) with optional EC4 extension crane.

The Statiflex™ 200-M with required stationary fan is designed specifically for weld applications. The stationary fan units extract weld fume through the arm, and exhaust fumes into the Statiflex™ 200-M filter unit. The internal spark arrestor and unique LongLife® filter cartridge captures the welding fume particulate. The particulate is collected on the inside of the cartridge, minimizing exposure to particulate during filter maintenance and disposal.

The Statiflex™ 200-M “single arm” system is recommended for consumable use of approximately 1500 lbs. (680 kg) of MIG wire or 1100 lbs. (500 kg) of stick or flux-cored wire before replacing.

The Statiflex™ 200-M “dual arm” system is recommended for consumable use of approximately 750 lbs. (340 kg) of MIG wire or 550 lbs. (250 kg) of stick or flux-cored wrie before replacing.

Filter performance will be affected by process and application variables including: base metal(s), consumables(s), and coatings (oil) if applicable.