• For use with any fuel gas except acetylene
• Injector determines capacity - torch supplied with one injector installed
• Three hose connections - separate cutting oxygen for improved performance

Injector Legend:
LPMC (01Y56, 01Y74) Type III - low pressure, medium capacity for general purpose cutting from 1/8 in. to 14 in. thick steel. Best all-around choice for multiple torch operation. Good multi-torch balance capability, coupled with heavier preheat than LLPMC injector, for quick pierce starts. Requires a minimum fuel gas pressure of 5 psi.
LLPMC (01Y61) Type I - low, low pressure, medium capacity for cutting up to 8 in. thick steel. Recommended only when maximum available fuel gas pressures are less than 5 psi. Excellent multi-torch balance capability, but limited preheat intensity, resulting in longer preheat times when piercing.
LPHC (01Y57, 01Y75) Type II - low pressure high capacity for cutting up to 20 in. thick steel with fuel gas pressures of at least 3 psi. Recommended for heavy preheat applications such as beveling, auxiliary preheat, etc. Not recommended where multi-torch balance is required.
MPHC (01Y58) - medium pressure, high capacity for very heavy preheat and cutting applications up to 20 in. with 1500 series nozzles and 28 in. with 1400 series steel industry torches and nozzles. A minimum of 5 psi fuel gas pressure is required. Use only with nozzle sizes for 12 in. or larger.