Scott Gross Store
Shopping Cart
# of Item(s): 0
Total: $0.00

ESAB All-State 13FC Brazing Alloy - 1/8" Thickness, 18" Length, 10 lb Pack - Case of 4 (40 lbs total) - 69050041

ESAB All-State 13FC Brazing Alloy - 1/8" Thickness, 18" Length, 10 lb Pack - Case of 4 (40 lbs total) - 69050041

Manufacturer: ESAB®
SKU: ESA69050041
Price: $1,231.18
Order Now

Quantity:


ESAB All-State 13FC Brazing Alloy - 1/8" Thickness, 18" Length, 10 lb Pack - Case of 4 (40 lbs total) - 69050041

Brazing alloy designed for wear resistance, overlaying and build-up on ferrous and non-ferrous materials. Deposits easily machined; may remelt again when building up without loss of toughness or overheating of base metal.  Use No. 5 or Jet Flux with No. 13 bare rod. No. 13 FC does not require flux.

Ideal for overlaying and building up gear teeth, shafts, bearings, valve seats and other surfaces subjected to frictional wear.

Procedure

Clean all areas to be joined or built up. Use a neutral flame with the torch at a low angle to the work. Preheat starting area to a dull red heat, apply a small amount of flux and alloy, continue to heat until alloy flows out. Add additional alloy until desired size and shape is obtained. Layer upon layer can be built up without removing flux or cleaning previous deposit.


Properties:


Typical Mechanical Properties  
Tensile Strength Up to 85 ksi, 59.77 kgs/mm2
Hardness  
As Welded 90 to 110 Brinell, 500 kg. load
After Work Hardening 0 to 200 Brinell, 500 kg. load
Working Temperature 1400 to 1750 °F, 760 to 954 °C
Remelt Temperature 1750 Min. °F, 954 Min. °C

E-mail a friend about this item.



Return to Catalog