ESAB All-State 11FC Brazing Alloy - 3/32" Thickness, 18" Length, 3 lb Tube - Case of 16 (48 lbs total)

ESAB All-State 11FC Brazing Alloy - 3/32" Thickness, 18" Length, 3 lb Tube - Case of 16 (48 lbs total) - 69053020

A high strength brazing alloy for joining ferrous and non-ferrous metals (except white metals), and carbon and alloy steels. Higher strength than ordinary bronze rods, can replace many higher cost silver alloys.

Joining carbon and alloy steels, as well as many non-ferrous materials. Widely used on production of bicycles, furniture, ornamental railings, radiators and other large volume items in conjunction with the All-State Jet Flux dispensing units where speed and highest quality are required.

Procedure

Clean joint area. Assemble parts making sure a close fit is maintained. A joint clearance of .001" to .003" will give maximum strengths. If All-State No. 11FC is used, heat base metal to a dull red; melt small amount of flux and alloy off at the joint and continue to heat until alloy flows.

Properties:

Typical Mechanical Properties
Tensile Strength	Up to 85 ksi, 59.77 kgs/mm2
Hardness	90 to 110 Brinell, 500 kg. load
Working Temperature	1200 to 1750 °F, 649 to 954 °C
Remelt Temperature	1750 Min. °F, 954 Min. °C

Return to Catalog