ESAB All-State 155FC Silver Brazing Alloy - 1/16" X 18" - 1 lb Tube

Surcharges may apply. Surcharges are billed separately!
Please call for a quote unless you agree to current market surcharges!

ESAB All-State 155FC Silver Brazing Alloy - 1/16" X 18" - 1 lb Tube - 69050280

A 56% silver content, low temperature, cadmium free, food/medical grade brazing alloy. Excellent capillary flow on ferrous and nonferrous metals (except white metals) or combinations of both. Use on steel, stainless steel, nickel or copper and their alloys. Typically uses are brewery, bottling plant, laboratory or food packaging equipment. Use 110 or S-200 Flux when using 155 bare. 155FC does not require flux.

Maintenance and production joining and repairing of steels, stainless steels, nickel and nickel base metals, copper and copper base alloys and high speed steels where high brazing temperatures would be harmful. Widely used in hospitals, laboratories, distilleries, refineries and delicate instrumentation work.

Procedure

Thoroughly clean joint area. Joint clearance should be .002" to .005". Apply All-State No. 110 or S-200 Flux to joint; if necessary, thin with alcohol or water. No flux is required when using TRUCOTE 155(flux coated) rod. When working on stainless steel and other materials subject to discoloration, paint area adjacent to joint with All-State No. 110 or S-200 Flux. Apply heat with a slightly carburizing flame until flux turns clear. Melt off enough alloy to fill completely. Allow to cool slowly. Remove flux with hot water.

Properties:

Typical Mechanical Properties
Tensile Strength	Up to 50 ksi, 35.16 kgs/mm2
Working Temperature	1150-1200 °F, 621-649 °C
Corrosion Resistance	Good

Categories

Procedure