ESAB All-State HS-2C Electrode - 3/16" X 14" - 10 lb Pack - Case of 4 (40 lbs total)

ESAB All-State HS-2C Electrode - 3/16" X 14" - 10 lb Pack - Case of 4 (40 lbs total) - 69010702

Smooth running electrode that lays a beautiful bead composed of complex carbides for long lasting protection against wear. Designed for severe abrasion and light impact. Deposits have low coefficient of friction. Ideal for severe wear caused by sand and other abrasive minerals. Good hot hardness at 1100°F. Build-up: 2 to 3 passes.

An all-position AC/DC reverse electrode for severe abrasion and moderate impact. Hardness 58 to 62 Rockwell C.

Outstanding operator appeal. Deposits have a low coefficient of friction. Good hot hardness at 1100°F (593°C). For hardsurfacing large areas in earth moving and rock crushing equipment, augers, sand pumps, mixer blades, scrapers, paddles and wear pads.

Procedure

Clean weld area. Use All-State Chamfer rod to remove fatigued and damaged metal. On alloy steels preheat to 300°F (149°C) is suggested. Maintain a medium arc at about a 45 degree angle in direction of travel. Remove slag between passes. Cool slowly.

Properties:

Typical Mechanical Properties
Hardness	58-62 Rc

Return to Catalog