ESAB Coreweld 80C-Ni1 Wire - .052" - 600 lb OMP

ESAB Coreweld 80C-Ni1 Wire - .052" - 600 lb OMP - 243417052

Coreweld 80C-Ni1 is a metal cored wire for application where good low temperature impact toughness or weathering characteristics are required. It operates over a broad range of parameters, produces a smooth, spray transfer with minimal fume and spatter and is tolerant of light rust and millscale. The shielding gas used should be Ar 75-92% / 25-8% CO2.

Coreweld 80C-Ni1 is alloyed with 1% Ni to provide good low temperature impact toughness. It also meets the requirements in AWS D1.1 and D1.5 for use on unpainted weathering steels. It is suitable for making single or multi-pass welds in the flat or horizontal position using conventional (DCEP or DCEN) or pulsed power. Typical applications include bridgecomponents, utility poles, storage tanks, and transportation equipment.

Shielding Gas

Ar 75-92% / 25-8% CO2

Classifications/Approvals
- AWS A5.28; E80C-Ni1
- CERTIFIED BY C.W.B.- AWS A5.28
- ASME SFA 5.28

Properties:

As Welded 85% Ar / 15% CO2
Yield Strength	70 ksi, 485 MPa
Tensile Strength	82 ksi, 565 MPa
Reduction in Area	66 %
Elongation in 2"	27 %
Typical Charpy V-Notch Impact Properties
Testing Temperature 0ºF (-18ºC)
As Welded 75% Ar / 25% CO2	55 ft.-lbs., 75 J
Testing Temperature -50ºF (-46ºC)
As Welded 85% Ar / 15% CO2	75 ft.-lbs.
Typical Undiluted Weld Metal Analysis
85% Ar / 15% CO2
C	0.04 %
Mn	1.5 %
Si	0.3 %
P	0.010 %
S	0.020 %
Ni	0.9 %

Return to Catalog

Categories

Shielding Gas

Classifications/Approvals