ESAB Spoolarc 40-B Welding Wire - 5/32" - 65 lb Coil

Surcharges may apply. Surcharges are billed separately!
Please call for a quote unless you agree to current market surcharges!

ESAB Spoolarc 40-B Welding Wire - 5/32" - 65 lb Coil - 1184F34

Designed for single or multipass welding of carbon and low alloy steels. Produces good as welded and stress relieved impact toughness. Weld metal tensile strength is in excess of 70 ksi (483 MPa). Applications include pressure vessel fabrication and other similar welds which require postweld heat treatment.

Usable with OK Flux 429 and OK Flux 80.

Classifications/Approvals
- AWS/ASME SFA5.23 EA2

Depositions/Parameters:

Spray Transfer Deposition Table
Diameter	Wire Feed Speed	Amps	Volts	Deposition Rate
.023 in, 0.6 mm	400 ipm, 1016 cm/min	100	23	2.7 lbs./hr., 1.2 kg./hr.
	450 ipm, 1143 cm/min	106	23	3.1 lbs./hr., 1.4 kg./hr.
	500 ipm, 1270 cm/min	111	24	3.4 lbs./hr., 1.6 kg./hr.
	550 ipm, 1397 cm/min	117	24	3.8 lbs./hr., 1.7 kg./hr.
	600 ipm, 1524 cm/min	122	25	4.1 lbs./hr., 1.9 kg./hr.
	630 ipm, 1600 cm/min	125	25	4.3 lbs./hr., 2 kg./hr.
.030 in, 0.8 mm	500 ipm, 1270 cm/min	160	24	5.8 lbs./hr., 2.6 kg./hr.
	550 ipm, 1397 cm/min	173	25	6.4 lbs./hr., 2.9 kg./hr.
	600 ipm, 1524 cm/min	187	25	7 lbs./hr., 3.2 kg./hr.
	650 ipm, 1651 cm/min	200	26	7.6 lbs./hr., 3.4 kg./hr.
.035 in, 0.9 mm	400 ipm, 1016 cm/min	180	25	6.3 lbs./hr., 2.9 kg./hr.
	450 ipm, 1143 cm/min	197	26	7.1 lbs./hr., 3.2 kg./hr.
	500 ipm, 1270 cm/min	213	26	7.9 lbs./hr., 3.6 kg./hr.
	550 ipm, 1397 cm/min	230	27	8.7 lbs./hr., 4 kg./hr.
.045 in, 1.2 mm	300 ipm, 762 cm/min	260	25	7.9 lbs./hr., 3.6 kg./hr.
	350 ipm, 889 cm/min	280	26	9.2 lbs./hr., 4.2 kg./hr.
	400 ipm, 1016 cm/min	300	28	10.5 lbs./hr., 4.8 kg./hr.
	450 ipm, 1143 cm/min	320	29	11.8 lbs./hr., 5.4 kg./hr.
	500 ipm, 1270 cm/min	340	30	13.1 lbs./hr., 6 kg./hr.
.052 in, 1.3 mm	265 ipm, 673 cm/min	275	26	9.3 lbs./hr., 4.2 kg./hr.
	300 ipm, 762 cm/min	310	28	10.5 lbs./hr., 4.8 kg./hr.
	350 ipm, 889 cm/min	360	31	12.2 lbs./hr., 5.6 kg./hr.
	390 ipm, 991 cm/min	400	33	13.6 lbs./hr., 6.2 kg./hr.
.062 in, 1.6 mm	180 ipm, 457 cm/min	290	26	9.1 lbs./hr., 4.1 kg./hr.
	200 ipm, 508 cm/min	310	28	10.1 lbs./hr., 4.6 kg./hr.
	230 ipm, 584 cm/min	340	31	11.6 lbs./hr., 5.3 kg./hr.
	260 ipm, 660 cm/min	370	34	13.2 lbs./hr., 6 kg./hr.
	280 ipm, 711 cm/min	390	36	14.2 lbs./hr., 6.4 kg./hr.

Shortarc Transfer Deposition Table
Diameter	Wire Feed Speed	Amps	Volts	Deposition Rate
.023 in, 0.6 mm	150 ipm, 381 cm/min	45	14	1 lbs./hr., 0.4 kg./hr.
	200 ipm, 508 cm/min	55	14	1.3 lbs./hr., 0.6 kg./hr.
	250 ipm, 635 cm/min	65	15	1.6 lbs./hr., 0.7 kg./hr.
	300 ipm, 762 cm/min	74	15	2 lbs./hr., 0.9 kg./hr.
	350 ipm, 889 cm/min	84	16	2.3 lbs./hr., 1 kg./hr.
	380 ipm, 965 cm/min	90	16	2.5 lbs./hr., 1.1 kg./hr.
.030 in, 0.8 mm	150 ipm, 381 cm/min	60	14	1.7 lbs./hr., 0.8 kg./hr.
	200 ipm, 508 cm/min	80	15	202 lbs./hr., 1 kg./hr.
	250 ipm, 635 cm/min	100	15	2.8 lbs./hr., 1.3 kg./hr.
	300 ipm, 762 cm/min	120	16	3.3 lbs./hr., 1.5 kg./hr.
	350 ipm, 889 cm/min	140	16	3.9 lbs./hr., 1.8 kg./hr.
	360 ipm, 914 cm/min	144	16	4 lbs./hr., 1.8 kg./hr.
.035 in, 0.9 mm	180 ipm, 457 cm/min	90	15	2.7 lbs./hr., 1.2 kg./hr.
	220 ipm, 559 cm/min	113	16	3.3 lbs./hr., 1.5 kg./hr.
	260 ipm, 660 cm/min	137	18	4 lbs./hr., 1.8 kg./hr.
	300 ipm, 762 cm/min	160	19	4.6 lbs./hr., 2.1 kg./hr.
.045 in, 1.2 mm	125 ipm, 318 cm/min	130	17	3.1 lbs./hr., 1.4 kg./hr.
	160 ipm, 406 cm/min	163	18	4 lbs./hr., 1.8 kg./hr.
	200 ipm, 508 cm/min	200	19	5 lbs./hr., 2.3 kg./hr.
.052 in, 1.3 mm	135 ipm, 343 cm/min	150	17	4.5 lbs./hr., 2.1 kg./hr.
	160 ipm, 406 cm/min	173	18	5.4 lbs./hr., 2.4 kg./hr.
	190 ipm, 483 cm/min	200	20	6.4 lbs./hr., 2.9 kg./hr.

Subarc Deposition Data
Diameter	Amps	Deposition Rate	Efficiency %
1/16 in, 1.6 mm	400 A	13.0 lbs/hr, 5.90 kg/hr	99
1/16 in, 1.6 mm	500 A	17.0 lbs/hr, 7.71 kg/hr	99
5/64 in, 2.0 mm	300 A	10.8 lbs/hr, 4.90 kg/hr	99
	400 A	14.5 lbs/hr, 6.58 kg/hr	99
	500 A	18.2 lbs/hr, 8.26 kg/hr	99
3/32 in, 2.4 mm	400 A	13.2 lbs/hr, 5.99 kg/hr	99
	500 A	17.0 lbs/hr, 7.71 kg/hr	99
	600 A	22.0 lbs/hr, 9.98 kg/hr	99
1/8 in, 3.2 mm	400 A	11.0 lbs/hr, 4.99 kg/hr	99
	500 A	14.5 lbs/hr, 6.58 kg/hr	99
	600 A	18.0 lbs/hr, 8.16 kg/hr	99
	700 A	21.2 lbs/hr, 9.62 kg/hr	99
5/32 in, 4.0 mm	500 A	12.5 lbs/hr, 5.67 kg/hr	99
	600 A	16.0 lbs/hr, 7.26 kg/hr	99
	700 A	19.5 lbs/hr, 23.2 kg/hr	99
	800 A	23.0 lbs/hr, 10.43 kg/hr	99
	900 A	26.0 lbs/hr, 11.79 kg/hr	99
3/16 in, 4.8 mm	600 A	13.9 lbs/hr, 6.31 kg/hr	99
	700 A	17.5 lbs/hr, 7.94 kg/hr	99
	800 A	21.0 lbs/hr, 9.53 kg/hr	99
	900 A	25.0 lbs/hr, 11.34 kg/hr	99
	1,000 A	29.2 lbs/hr, 13.25 kg/hr	99
	1,100 A	34.0 lbs/hr, 15.42 kg/hr	99

Properties:

As Welded 98% Ar / 2% O2 Shielding Gas
Yield Strength	62 ksi, 425 MPa
Tensile Strength	76 ksi, 525 MPa
Elongation in 2"	28 %
As Welded CO2 Shielding Gas
Yield Strength	60 ksi, 415 MPa
Tensile Strength	73 ksi, 505 MPa
Elongation in 2"	28 %
Typical Charpy V-Notch Impact Properties
Testing Temperature -20ºF (-29ºC)
As Welded CO2 Shielding Gas	75 ft.-lbs., 102 J
As Welded 98% Ar / 2% O2 Shielding Gas	83 ft.-lbs., 112 J
Typical Undiluted Weld Metal Analysis
As Welded CO2 Shielding Gas
C	0.07 %
Mn	0.9 %
Si	0.4 %
P	0.006 %
S	0.008 %
98% Ar / O2 Shielding Gas
C	0.8 %
Mn	1.0 %
Si	0.5 %
P	0.006 %
S	0.008 %
Typical Wire Analysis
C	0.09 %
Mn	1.2 %
Si	0.5 %
P	0.007 %
S	0.005 %
Cu	0.07 %
Wire Chemistries
C	0.10 %
Mn	1.15 %
Si	0.03 %
P	0.017 %
S	0.015 %
Mo	0.50 %

Surcharges may apply. Surcharges are billed separately!
Please call for a quote unless you agree to current market surcharges!

Return to Catalog

Categories

Classifications/Approvals