ESAB Spoolarc 100 Welding Wire - 5/32" - 65 lb Coil

Surcharges may apply. Surcharges are billed separately!
Please call for a quote unless you agree to current market surcharges!

ESAB Spoolarc 100 Welding Wire - 5/32" - 65 lb Coil - 2344F34

Designed for low alloy quenched and tempered steels. Weld metal mechanical properties include high yield strength (exceeds 100 ksi/690 MPa) and low temperature impact toughness. Applications include heat treatable valves and fittings, structural weldments and low temperature pipe valves.

Used with OK Flux 10.62

Classifications/Approvals
- AWS/ASME SFA5.23 EF5

Depositions/Parameters:

Spray Transfer Deposition Table
Diameter	Wire Feed Speed	Amps	Volts	Deposition Rate
.023 in, 0.6 mm	400 ipm, 1016 cm/min	100	23	2.7 lbs./hr., 1.2 kg./hr.
	450 ipm, 1143 cm/min	106	23	3.1 lbs./hr., 1.4 kg./hr.
	500 ipm, 1270 cm/min	111	24	3.4 lbs./hr., 1.5 kg./hr.
	550 ipm, 1397 cm/min	117	24	3.8 lbs./hr., 1.7 kg./hr.
	600 ipm, 1524 cm/min	122	25	4.1 lbs./hr., 1.8 kg./hr.
	630 ipm, 1600 cm/min	125	25	4.3 lbs./hr., 1.9 kg./hr.
.030 in, 0.8 mm	500 ipm, 1270 cm/min	160	25	5.8 lbs./hr., 2 kg./hr.
	550 ipm, 1397 cm/min	173	25	6.4 lbs./hr., 2.9 kg./hr.
	600 ipm, 1524 cm/min	187	25	7 lbs./hr., 3.1 kg./hr.
	650 ipm, 1651 cm/min	200	26	7.6 lbs./hr., 3.4 kg./hr.
.035 in, 0.9 mm	400 ipm, 1016 cm/min	180	26	6.3 lbs./hr., 3.4 kg./hr.
	450 ipm, 1143 cm/min	197	26	7.1 lbs./hr., 3.2 kg./hr.
	500 ipm, 1270 cm/min	213	26	7.9 lbs./hr., 3.5 kg./hr.
	550 ipm, 1397 cm/min	230	27	8.7 lbs./hr., 3.9 kg./hr.
.045 in, 1.2 mm	300 ipm, 762 cm/min	260	27	7.9 lbs./hr., 4 kg./hr.
	350 ipm, 889 cm/min	280	26	9.2 lbs./hr., 4.1 kg./hr.
	400 ipm, 1016 cm/min	300	27	10.5 lbs./hr., 4.6 kg./hr.
	450 ipm, 1143 cm/min	320	29	11.8 lbs./hr., 5.2 kg./hr.
	500 ipm, 1270 cm/min	340	30	13.1 lbs./hr., 5.8 kg./hr.
.052 in, 1.3 mm	265 ipm, 673 cm/min	275	30	9.3 lbs./hr., 6 kg./hr.
	300 ipm, 762 cm/min	310	27	10.5 lbs./hr., 4.6 kg./hr.
	350 ipm, 889 cm/min	360	30	12.2 lbs./hr., 5.4 kg./hr.
	390 ipm, 991 cm/min	400	32	13.6 lbs./hr., 6 kg./hr.
.062 in, 1.6 mm	180 ipm, 457 cm/min	290	33	9.1 lbs./hr., 6.2 kg./hr.
	200 ipm, 508 cm/min	310	27	10.1 lbs./hr., 4.4 kg./hr.
	230 ipm, 584 cm/min	340	30	11.6 lbs./hr., 5.1 kg./hr.
	260 ipm, 660 cm/min	370	33	13.2 lbs./hr., 5.8 kg./hr.
	280 ipm, 711 cm/min	390	35	14.2 lbs./hr., 6.2 kg./hr.

Shortarc Transfer Deposition Table
Diameter	Wire Feed Speed	Amps	Volts	Deposition Rate
.023 in, 0.6 mm	150 ipm, 381 cm/min	45	14	1 lbs./hr., 0.4 kg./hr.
	200 ipm, 508 cm/min	55	14	1.3 lbs./hr., 0.6 kg./hr.
	250 ipm, 635 cm/min	65	15	1.6 lbs./hr., 0.7 kg./hr.
	300 ipm, 762 cm/min	74	15	2 lbs./hr., 0.9 kg./hr.
	350 ipm, 889 cm/min	84	16	2.3 lbs./hr., 1 kg./hr.
	380 ipm, 965 cm/min	90	16	2.5 lbs./hr., 1.1 kg./hr.
.030 in, 0.8 mm	150 ipm, 381 cm/min	60	14	1.7 lbs./hr., 0.8 kg./hr.
	200 ipm, 508 cm/min	80	15	2.2 lbs./hr., 1 kg./hr.
	250 ipm, 635 cm/min	100	15	2.8 lbs./hr., 1.3 kg./hr.
	300 ipm, 762 cm/min	120	16	3.3 lbs./hr., 1.5 kg./hr.
	350 ipm, 889 cm/min	140	16	3.9 lbs./hr., 1.8 kg./hr.
	360 ipm, 914 cm/min	144	16	4 lbs./hr., 1.8 kg./hr.
.035 in, 0.9 mm	180 ipm, 457 cm/min	90	15	2.7 lbs./hr., 1.2 kg./hr.
	220 ipm, 559 cm/min	113	16	3.3 lbs./hr., 1.5 kg./hr.
	260 ipm, 660 cm/min	137	18	4 lbs./hr., 1.8 kg./hr.
	300 ipm, 762 cm/min	160	19	4.6 lbs./hr., 2.1 kg./hr.
.045 in, 1.2 mm	125 ipm, 318 cm/min	130	17	3.1 lbs./hr., 1.4 kg./hr.
	160 ipm, 406 cm/min	163	18	4 lbs./hr., 1.8 kg./hr.
	200 ipm, 508 cm/min	200	19	5 lbs./hr., 2.3 kg./hr.
.052 in, 1.3 mm	135 ipm, 343 cm/min	150	17	4.5 lbs./hr., 2.1 kg./hr.
	160 ipm, 406 cm/min	173	18	5.4 lbs./hr., 2.4 kg./hr.
	190 ipm, 483 cm/min	200	20	6.4 lbs./hr., 2.9 kg./hr.
1.3 mm	483 cm/min

Properties:

Typical Wire Analysis
C	0.12 %
Mn	1.9 %
Si	0.1 %
P	0.006 %
S	0.006 %
Cr	0.4 %
Ni	2.4 %
Mo	0.5 %
Cu	0.3 %
Wire Chemistries
C	0.12 %
Mn	1.91 %
Si	0.07 %
P	0.007 %
S	0.006 %
Cr	0.38 %
Ni	2.40 %
Mo	0.50 %
Other	Cu 0.32

Surcharges may apply. Surcharges are billed separately!
Please call for a quote unless you agree to current market surcharges!

Return to Catalog

Categories

Classifications/Approvals