Tri-Mark TM 105D2 Gas Shielded Flux Cored Low Alloy Wire - E100T5-D2C - 3/32" Wire - 60 lb Coil - S650429-K02

TM-105D2 provides a combination of good low temperature impact toughness with minimum 100,000 psi tensile strength following stress relieving. The basic slag also minimizes any hydrogen-induced crack sensitivity.  The molybdenum in the weld deposit helps prevent the deterioration of tensile strength during long term stress relieving. The chemical composition of this wire is well suited for the repair of manganese-moly castings. It can also be used to weld components which undergo post weld heat treatment and must maintain a tensile strength in the neighborhood of 100,000 psi. This wire is recommended for flat and horizontal positions, single-and multiple-pass welding, using 100% CO2 or 75% Ar/25% CO2 shielding gas.

PRODUCT CHARACTERISTICS:
• Excellent low temperature toughness.
• Low weld metal hydrogen.
• Manganese-molybdenum weld metal well suited to repair castings of similar composition.
• After several hours of stress relieving, weld metal maintains tensile strength.

SHIELDING GAS:
100% CO2, or 75% Ar/25% CO2, 35-50 cfh


Specifications:

Data Sheet                          TM_105D2.pdf

Return to Catalog