Diversion™ 165
The Personal User's AC/DC TIG machine. Set a material type and thickness, and you are ready to weld.
Easy-to-understand operator interface. Only three switches to operate the machine: a power switch, a material selection switch, and an amperage control/material selection switch.
Inverter-based, AC/DC power source provides a more consistent welding arc while operating more efficiently (less energy is used).
Portable. Whether it's in the shop, garage or at the race track, at 50 pounds it can be taken anywhere.
HF start for non-contact arc starting that elminates tungsten and material contamination.
Fan-On-Demand™ improves power efficiency and reduces noise and maintenance by lessening the amount of airborne contaminants pulled through the machine.
Auto-Postflow protects the weld end zone and electrode by optimizing postflow time based on welding amperage - for adequate shielding every time without waste and no need for adjustment.
Fully adjustable amperage control from 10-165 amps DC and AC.
Weldcraft® LS17 TIG Torch. 150 A, air-cooled torch features the hand controlled amperage adjustment built into the handle of the torch.
Comes Complete With
- Power source with primary cord (50A, 230 V plug, attached)
- 12.5 ft (3.6 m) LS17 Weldcraft® TIG torch with backcap, ceramic gas cup, 3/32 in (2.4 mm) collet and collet body, and 2% ceriated tungsten
- 11 ft (3.4 m) work cable and clamp
- Smith® Argon regulator/flow gauge with hose
- TIG Welding for Dummies book
-
- Welding project blueprint for a machine cart/cylinder rack
Process
Applications
Personal User Applications
- Chassis Fabrication
- Aluminum Oil Pans & Intake Manifolds
- Stainless Exhaust
- Aircraft Frames & Components
- Weld Repair on Home Equipment
- Metal Art
- Vocational Training
Specifications
Input Power
Rated Output
- DC: 150 A at 16 VDC, 20% Duty Cycle
- AC: 150 A at 16 VAC, 20% Duty Cycle
Welding Amperage Range
Max. Open-Circuit voltage
Weight
Return to Catalog
Sign In
