Miller XMT 350 MPa Package 208-575V w/ Suitcase X-TREME 12 VS and Bernard Q300 - 951310

Outstanding multiprocess inverters with built-in features providing the ultimate in productivity. Auto-Line provides link-free primary power operation.

New! XMT® 350 MPa expands the process capability of the XMT Series, with built-in Pulsed MIG operation. MPa stands for MIG, Pulse, advanced arc control. The advanced arc control provides:

• Improved pulsed MIG welding.
• More control over the puddle and weld bead using SharpArc™.
• More robust and stable arc at very low arc lengths.
• Reduces heat input
• Welds on a wider range of material thicknesses.

Sharp Arc™ on the XMT 350 MPa:

• Can handle virtually any welding job, including those hard-to-weld alloys found at power generation plants and shipbuilding facilities.
• A low setting gives a more fluid puddle and a flatter bead appearance.
• A high setting gives a less fluid puddle and a ropier bead appearance.
  
• Can be adjusted to help customize the arc for the type of shielding gas being used.

Auto-Line™ Power Management technology allows for any input voltage hook-up (208-575V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable input power.

350 amps of welding output at 60% duty cycle enables improved deposition through using larger diameter electrodes common in construction applications.

Tweco-style output connectors provided standard on the XMT-350 VS. Eliminates the need for cable adapters at the construction site.

Power factor of .95 enables smaller fuses/breakers and primary wiring. Primary amperage draw at rated output is 25% less than the competition.

Exceptional electrical efficiency. At 400 amps, efficiency is 87.24%, this helps to reduce the utility bill or fuel supply required to weld.

Inverter arc control technology provides greater puddle control for superior 6010 Stick electrode performance.

Reduced OCV operation - an internal dip switch enables reduced open-circuit voltage Stick welding capability. OCV is typically below 15 volts.

Process selector switch reduces the number of control setup combinations without reducing any features.

Large, dual digital meters are easy to view and presettable to ease setting weld output.

Lightweight, aerospace-grade aluminum case offers protection with the benefit of reduced weight.

Lightweight, aerospace-grade aluminum case offers protection with the benefit of reduced weight.

Fan-On-Demand™ operates only when needed reducing noise, power consumption, and the amount of airborne contaminants pulled through the machine.

Lift-Arc™ start provides TIG arc starting without the use of high frequency.

Wind Tunnel Technology™
Internal air flow that protects electrical components and PC boards from dirt, dust, debris... greatly improving reliability.

Adaptive Hot Start™ for Stick
Automatically increases output amperage at the start of a weld should the start require it and prevents the electrode from sticking and creating an inclusion.

LVC™ Line Voltage Compensation
Keeps output of the power source constant regardless of fluctuation in input power ± 10%.