ESAB Origo MIG 410 w/ Origo Feed M12 Basic Package

ESAB Origo MIG 410 w/ Origo Feed M12 Basic Package - 0558101329

Powerful and flexible.

The Origo MIG 320/410/510 are step-switched power sources for medium (320) to heavy-duty (410 and 510) MIG/MAG welding. The machines are made with a strong galvanized metal casing to withstand harsh environments. Its large wheels, sturdy lifting eyelets, and an undercarriage designed for forklift transport make the Origo MIG machine easy to move. The wide current and voltage make it easy to optimize settings for a wide variety of filler metals and gases.

The machines are optimized to operate together with the Origo Feed 304 wire feeder. Electronically controlled feeding gives an accurate and stable arc. The feeders are available with 1.8 in. diameter (30 mm) feed rollers for wires up to .062 in. diameter (1.6 mm).

The wire feed unit sits on a swivel post mounted on the top of the Origo MIG 320/410/510, providing a 360-degree radius of operation. The feeder mechanism is easy to access, and all wear parts can easily be exchanged. A single pressure device makes it easy to adjust the appropriate feeding pressure. All electronic components are protected in a separate compartment.

Feeder Features:

WFS range 31-1000 ipm
2/4 stroke – simplifies welding
Adjustable burn-back timer – gives correct stick-out
Creep start – gradual feed of wire for ultimate starts
Quick connectors – shortest possible setup times
Multiple mounting options – counterbalance and mast, wheel kit, or hanging bracket
Inching/gas purge (optional)

Power Source Features:

Outstanding welding characteristics – high-efficient and quality welds
Sturdy galvanized metal casing with air filter (optional)
Wide current and voltage range – for multiple applications
Selectable inductance taps – 320 and 410 have 2 taps, 510 has 3 taps
Easy change of polarity – all types of cored wire
Connection cable length – up to 114 ft. (35 m)
Digital meter – provides an accurate reading of the set welding parameters and will hold its display even after welding has finished
Idle mode – power and noise efficient; cooling fan works only when needed
Undercarriage standard

Feeder Specifications:

Power supply	42 vac, 50/60 Hz.
Wire spool capacity	44 or 60* lbs., 19 or 27* kg
Max. spool diameter	12 in., 300 mm
Wire feed speed	31 to 1000 ipm, 0.8 to 25 m/min
Dimensions
Length	27.1 in., 690 mm
Width	10.8 in., 275 mm
Height	16.1 in., 420 mm
Weight	32 lbs., 15 kg
Wire dimensions
Steel	.023-.062 in., 0.6-1.6 mm
Stainless Steel	.023-.062 in., 0.6-1.6 mm
Aluminum	.040-.062 in., 1.0-1.6 mm
Cored wire	.030-.062 in., 0.8-1.6 mm
*	(*requires optional accessories)

Power Source Specifications:

Mains voltage 230/460 V 3 ph 60 Hz
Permitted load at 30% duty cycle    X
Permitted load at 50% duty cycle    400 A/34 V
Permitted load at 60% duty cycle 365 A/32 V
Permitted load at 100% duty cycle 280 A/28 V
Primary current at 30% duty cycle    X
Primary current at 50% duty cycle   45/22 A
Primary current at 60% duty cycle 41/21 A
Primary current at 100% duty cycle 28/14 A
Setting range (DC) 50 A/16.5 V–400 A/34 V
Open circuit voltage 17–45 V
Open circuit power 360 W
Open circuit power with cooling unit     600 W
Power factor at maximum current 0.98
Efficiency at maximum current 71%
Control voltage   X
Voltage steps 40
Inductance outlets 2
Dimensions L x W x H   32 x 21 x 36 in. (812 x 552 x 925 mm)

Weight 317 lb (144 kg)
Weight with cooling unit   348 lb (158 kg)
Operating temperature 14 to 104°F (-10 to +40 °C)
Enclosure class IP 23

Basic package includes:
power source
feeder
15 ft. (4.5 m) 400-amp torch.

Return to Catalog