ESAB MultiMaster 300 Welder, 230-575V, 1 Phase w/ 250 Amp Torch and TIG Torch

ESAB MultiMaster 300 Welder, 230-575V, 1 Phase w/ 250 Amp Torch and TIG Torch - 0558101413

The MultiMaster 300 is an industrial ready-to-weld, multi-process package. ESAB’s Advanced SuperSwitch™ technology makes welding a breeze. The MultiMaster’s output pre-set control with two digital meters makes for quick setup. It features DC welding output from 15 to 300 amps, and is rated at 40% duty cycle. Heavy-duty, four-drive roll stand comes with v groove drive rolls for wires .035 in. (0.9 mm) and .045 in. (1.2 mm) diameter.

The machine comes packed with a multitude of convenient features, such as a 250-amp torch, a large-capacity, built-in toolbox, an AutoFan,® and a dual "easy on" cylinder tray. The MultiMaster 300 can also be configured to run with a Marathon Pak.®

Features:

Advanced SuperSwitch technology
DC welding output from 15 to 300 amps; rated at 40% duty cycle
Variable inductance control
Output pre-set control with two digital meters for quick setup
250-amp torch for wires .035 in. (0.9 mm) and .045 in. (1.2 mm) diameter
Heavy-duty, four-drive roll stand with v groove drive rolls
Convenient built-in toolbox
Dual “easy-on” cylinder tray
Compatible with the Marathon Pak
AutoFan®

Applications:

General fabrication and civil construction
Repair and maintenance
Power generation
Agriculture
Automotive
Pipe welding

Technical Data:

Rated DCCV or DCCC output (10 min base)
40% duty cycle (NEMA Class 1)      300 A @ 32 vdc
Output current range: MIG/Fluxcore (GMAW/FCAW)      35-300 A
Output current range: TIG (GTAW)      10–300 A
Output current range: Stick (SMAW)    40–300 A
Open circuit voltage: MIG/Fluxcore (GMAW/FCAW)    70 vdc
Open circuit voltage: TIG (GTAW)      20 vdc
Open circuit voltage: Stick (SMAW)      70 vdc
Primary input voltage and current @ 300 A rated load 208/230 VAC, 60 Hz, 1 ph      66/60 A
Wire feed range      65–675 in./min (1.6–17.3 m/min)
Shipping weight      300 lbs (136 kg)
Dimensions L x W x H      39.5 x 25.3 x 33.5 in. (1000 x 640 x 850 mm)

Comes Complete With:

power source
built-in four roll wire feeder with .035-.045 (0.9mm-1.2 mm) v groove feed rolls
factory installed undercarriage and dual-cylinder rack
250-amp NAS MIG torch
contact tips .025-.045"
regulator/flowmeter AR CO2
6 ft. (1.8 m) gas hose
electrode holder and NEMA 6-50 P plug
15 ft. (4.5 m) work cable and clamp
10 ft. (3 m) primary input cable (208-230 model only)
MIG welding handbook
10 lb (4.5 kg) spool of .035 (0.9 mm) 87 HP steel wire
sample assortment of stick electrodes
25 ft. (7.6 m) HW-17v-2TL Heliarc® TIG torch
Heliarc torch accessory kit
30 ft. (9.1 m) FC-5C foot control
remote control panel
15 ft (4.5 m) electrode cable and holder
R33-FM 580 flowmeter/regulator
TIG welding handbook

Return to Catalog